Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Tampa
Furnace repair in Tampa typically runs $150 – $700, and most no-heat calls can be diagnosed and fixed in a single visit. If your furnace is blowing cold air, short-cycling, or won’t kick on at all, call Halden Heating and Air Tampa at (850) 608-1463. We send a background-checked technician with a live arrival time you can track to your door, and you get a written price before any work starts. That’s how we’ve handled heating repair across Tampa since we opened, and it’s not changing.
Why Halden Heating and Air Tampa Is Tampa’s Preferred Furnace Repair Company
Halden Heating and Air Tampa is part of the Relay Home Co. network, founded in 2004 and independently owned and operated. The Furnace Repair team is run by Andre Fuller, who trains every technician to diagnose first and quote second. That’s the Relay Standard: no vague estimates, no door-step price changes, and a written guarantee on every repair. If the fix fails within the coverage window, the second visit is free. Not “maybe free.” Free.
What does that actually look like when your furnace dies in Tampa? You call, a live person answers at any hour, and you book online or by phone. You get a live arrival time you can follow on your phone. The tech arrives in a uniform, walks you through exactly what’s wrong, and hands you a written price before touching a tool. If it’s a simple ignitor replacement, you’ll know the cost before the part comes off the truck. That’s The Relay Visibility Guarantee, and it applies to every job we do in Tampa.
Tampa homeowners use us because furnace problems here don’t always announce themselves. A unit can run fine through January, then fail on the first humid cold snap in February when the heat exchanger has been quietly corroding for months. We know the failure patterns in this market because we see them weekly. That local context is why we give straight answers about repair versus replacement instead of upselling you into a system you don’t need.
Styles & brands we work with







Heating Repair in Tampa
Heating Repair covers the broad category of getting a furnace, heat pump, or boiler producing warm air again when it stops. In Tampa, the most common heating repair calls we run involve failed ignitors, tripped limit switches, dirty flame sensors, and failing blower motors. A typical heating repair in Tampa runs $150 – $700 depending on the part and the time needed to install it. The $150 end covers a flame sensor cleaning or thermocouple replacement; the $700 end covers a blower motor or gas valve replacement on a propane system or an older unit with difficult access.
But there’s a Tampa-specific layer to heating repair that doesn’t exist everywhere. Homes in New Tampa and Westchase are newer and mostly heat pump territory, while the 1920s bungalows in Seminole Heights and Hyde Park often still run converted gravity furnaces with aging heat exchangers. Each housing type fails differently. A heat pump iced over in 40-degree weather isn’t the same diagnosis as a propane furnace sooting up in Odessa. Our techs treat them as different jobs, because they are.
No-Heat Diagnostics That Address the Real Cause
We start by testing the sequence of operation: thermostat call, inducer draft, ignitor glow, flame signal, blower ramp-up. But in Tampa’s rural outskirts, a “no-heat” call often has nothing to do with the furnace itself. It’s a gas valve calibrated for natural gas on a propane system, or a clogged condensate line from summer AC use backing into the unit. We check the whole system, not just the obvious part.
Repairs We Can Complete Same-Day in Tampa
Ignitor replacements, flame sensor cleanings, capacitor swaps, limit switch replacements, and thermostat recalibrations are same-day jobs in most of Tampa. If you’re in Lutz or Thonotosassa, add the drive time, but we still arrive the same day you call. If the repair needs a part we don’t stock on the truck, we give you a written quote and a set install date before we leave.
Boiler Repair in Tampa
Boiler Repair in Tampa is less common than furnace work, but it’s critical for older homes that still run hydronic heat. Seminole Heights and Hyde Park have a good number of 1930s and 1940s houses with original radiators and boilers that have been converted from coal to oil to gas over the decades. A boiler repair in Tampa typically runs $150 – $700, with the higher end covering circulation pump replacements, zone valve failures, and expansion tank swaps. The lower end covers pressure switch adjustments and air bleed issues.
Boilers don’t fail the way forced-air furnaces do. A furnace gives you warning: rattling blower, weak airflow, short cycles. A boiler can sit dormant for months and then refuse to fire on the first genuinely cold night. That’s when we get the call, and the fix is usually a failed thermocouple, a stuck zone valve, or a circulator pump that seized over the summer. On a 1940s system in Tampa, the original cast-iron sections often have another decade of life left, so repair usually beats replacement. We’ll tell you if that’s the case.
Circulator Pumps and Zone Valves
Most boiler repair calls in Tampa’s older homes come down to one of two things: a circulator pump that’s no longer moving water, or a zone valve that won’t open. If you hear the boiler firing but one radiator stays cold, that’s a zone valve problem. If no radiators heat at all and you hear a humming near the boiler, the circulator has likely failed. Both are straightforward repairs.
Steam Versus Hot Water Boilers
Tampa has both, and they need different repair approaches. Steam systems need proper pressuretrol settings and clean pigtails, while hot water systems need correct fill pressure and working air scoops. Many of the steam boilers in Tampa’s older homes still work fine but get written off by technicians who only know forced-air systems. That’s where a focused boiler repair tech pays for themselves.
Trusted Brands We Service in Tampa
We service Carrier, Trane, Lennox, and American Standard furnaces and heat pumps across Tampa, and our trucks carry common parts for these brands so most repairs happen in one trip. That includes ignitors, flame sensors, pressure switches, and capacitors for the systems we see most often in Tampa homes. If you have a Carrier furnace in Carrollwood or a Trane heat pump in Westchase, we can usually repair it the same day you call.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Tampa Homes
- Propane furnaces sooting up in Odessa and Lutz. Natural gas lines stop miles short of the city limits, so many homes run on propane. A gas valve calibrated for natural gas on a propane system will soot the burners and trigger repeated no-heat calls. We recalibrate the valve for propane’s lower delivery pressure and the sooting stops.
- Dust-choked ductwork in homes off dirt roads near Thonotosassa. Gravel and dirt driveways push fine dust into return ducts. High static pressure from clogged ducts overworks the blower motor and trips the limit switch, so the furnace runs for ten minutes and shuts off. The fix is a static pressure test, duct cleaning, and often a new filter cabinet.
- Heat exchanger corrosion from salt-laden air. Tampa’s salt air doesn’t stop at the beach. Exposed rural properties with no wind shelter, even twenty miles inland, see accelerated corrosion on the heat exchanger and outdoor components. We check for cracks and corrosion during every tune-up because a failed heat exchanger is a carbon monoxide risk.
- Heat pump defrost failures during cold snaps. When Tampa hits the low 40s with high humidity, heat pumps frost over fast. A failed defrost control board or a bad reversing valve means the outdoor unit ices up and the system blows cold air. We diagnose the defrost cycle before condemning the compressor.
Pricing for Furnace Repair in Tampa, FL
Furnace repair in Tampa, FL runs $150 – $700, and here’s the honest breakdown:
| Service | Price Range |
|---|---|
| Heating Repair | $150 – $700 |
| Boiler Repair | $150 – $700 |
| Furnace Tune-Up (Propane) | $80 – $200 |
Most heating repair jobs in Tampa fall between $200 and $400. The $150 end is a flame sensor cleaning or thermocouple replacement. The $700 end is a blower motor, gas valve, or heat exchanger inspection on a propane system with difficult access. Every repair includes a written guarantee, and if the fix fails within the coverage window, the return visit is free. Call (850) 608-1463 for a written quote. Estimates are free, and the price we quote is the price you pay.
We Also Serve Cities Near Tampa
Halden Heating and Air Tampa serves the whole Tampa metro, including Dunedin, Pinellas Park, Lutz, and Tarpon Springs. If you’re in one of those areas and need Furnace Repair in Tampa quality work, we dispatch local crews from the metro office, and dispatch is coordinated through the brand’s South FL office in Miami. Call (850) 608-1463 and a live person will schedule you. You’ll get the same written-price guarantee no matter which side of the bay you’re on.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Tampa
Propane burns at a lower delivery pressure than natural gas, and a gas valve set for natural gas will over-fuel a propane furnace. That causes incomplete combustion, which leaves black soot on the burners and eventually trips the flame sensor. The fix is recalibrating the gas valve for propane, and we do this on almost every rural Tampa call. Call (850) 608-1463 and we’ll test your gas pressure before replacing anything.
Every fall, without exception. Dirt road dust loads into return ducts and clogs the blower motor and filter faster than a paved neighborhood. If your furnace sits near a gravel drive, a tune-up every October catches the static pressure buildup before it trips the limit switch and leaves you cold on a January night. A propane furnace tune-up in Tampa runs $80 – $200.
Yes, we can. The iced-over unit is usually a defrost cycle failure, not a dead compressor. We test the defrost control board, the reversing valve, and the outdoor temperature sensor. In Tampa’s humid cold snaps, the unit can frost over fast, and the fix is often a $150 – $350 defrost control replacement. Call us and we’ll diagnose it before the ice gets worse.
That’s almost always a limit switch trip from high static pressure. Undersized ductwork or a clogged filter on an outbuilding furnace overworks the blower motor, the heat exchanger overheats, and the limit switch cuts power to the burner. We run a static pressure test to find the restriction, clean the ducts or upgrade the filter, and the short-cycling stops. The repair is usually in the $150 – $350 range for the Lutz area.
If the boiler fires and the radiators stay cold, the radiators aren’t the problem. It’s a circulation issue: a failed circulator pump or a stuck zone valve. If the boiler won’t fire at all, it’s a thermocouple, pressuretrol, or ignition problem. Either way, a boiler repair in Tampa runs $150 – $700, and we’ll tell you if the original cast-iron boiler is worth saving. Usually it is.
Call Halden Heating and Air Tampa at (850) 608-1463 for furnace repair in Tampa, FL. You’ll get a live person, a written price before any work starts, and a written guarantee on every repair. That’s how it should work.
Written by Andre Fuller, Owner at Halden Heating and Air Tampa.